DCC Spike Buster bus terminators (1 pair)

Are you baffled by DCC wiring? We have prepared a free helpsheet to assist you. Click here to get your copy.

Do you have the odd unusual problem of run-away loco's or ones that sometimes just don't respond? What you might be experiencing is corruption of your DCC bus signals. The signal leaves your controller just fine but by the time it's got through your wiring and track it can get corrupted and so the decoder either ignores the command, or just keeps going!

These little devices are designed to fit as a pair to the ends of your DCC bus. You don't need more that two regardless of how big your layout is.

They help stabilize the bus signals which in turn can lead to more reliable running and less problems.

Sold as a pair, simply fit one of these to both ends of your bus wires.

Supplied with pins for direct connection to our Hydra DCC bus bars but can be fitted directly to the bus wires.

Full instructions on the best place to fit these are included.

Maximum rated power 3A so suitable for all DCC controllers without a power booster.